product description
The transition between air, non-conduction liquids and water can be measured with the oil thickness measuring device by Spohr. Thereby the thickness of the corresponding layer can be determined.
product highlights:
operating method:
product highlights:
- simple operation
- both floating and sunken, non-conduction layers (e.g. various solvents) can be detected
- the supplied cable duct protectes the cable and increases the reading accuracy
- measuring length up to 500 m
- probe is easy to clean
- automatic power shutdown of the probe
- low power consmption
- the measurin principle (combination of onfrared and conductivity probe) and the special construction of the probe provide the following advantages:
- same zero point of the sensors prevents error measurement
- the diameter of the probe is only 16 mm
- layers with thicknesses of a few millimeters only can be measured
- thinner layers can still be detected
operating method:
- the device displays the moment the probe immerses into a liquid media and shows the difference between conducting (water) and non-conducting liquids (petrol, oil, solvents, ...)
- when immersing into non-conducting liquid, a light and a buzzer are switched on
- when immersing into water, light and sound are periodically interrupted
- all depths with changes from air or between the various liquids can be read off on the measuring cable
Downloads
data sheet English (0.73 MB)
data sheet German (0.79 MB)